High-Expansion Foam Generator (UL LISTED)

IFP TURBO-HX High Expansion Foam Generators perform exceptionally well in challenging environments. Constructed from corrosion-resistant Stainless Steel 316, these generators rely on a water turbine for operation. They achieve foam expansion with ratios from 350:1 to 925:1, depending on the solution flow rate and water pressure.

Special Features

• Highly reliable and compact design
• Very high output of foam
• Fixed type Foam generator
• Easy installation with units capable of being mounted in the horizontal position
• No outside source of power required – only the pressurized foam solution
• Units will operate with foam solution pressures as low as 2.8 bar (40 psi).

The effectiveness of the High Expansion Generator depends on the appropriate setup and maintenance.Moreover, the continuous flow of the foam solution combined with air movement through the screen ensures effective foam generation.

Applications

IFP TURBO-HX High Expansion Foam Generators are suitable for use in total flooding as well as local application high-expansion foam systems. Total flooding high-expansion foam systems are commonly used to protect the following hazards.

• Oil Refineries & Oil Installations
• Chemical Stores.
• Control of Vapour release from toxic/flammable liquid spills.
• Petrochemical Plants
• Tyre & Rubber Stores.
• Ship holds & Engine Rooms.
• Flammable Liquid including Paint Stores
• Aircraft Hangars
• Cable Ducts & Transformer Rooms
• Fertilizer Plant
• Basements & Substations.
• Mining

Model

IFP TURBO-HX 3000    Foam Output 1850 – 3200 cfm

IFP TURBO-HX 10000   Foam Output 6200 – 10500 cfm

IFP TURBO-HX 21000   Foam Output  10400 – 21600 cfm

Approvals and listing

IFP TURBO-HX, High-Expansion Foam Generators are UL Listed for use with IFP UNILIGHT-HX 2% High-Expansion Foam Concentrate for use with both fresh and salt water.